5-7. WLAN communication
For DT-X100M10R/M10R-CN/M10R2/M10R2-CN/M30R/M30R-CN/M50R/M70R
5-7-1. Test Confi guration
PC
5-7-2. Format of Confi guration File
Create a confi guration fi le that matches the test environment.
This section describes the format.
If the fi le has already been created, proceed to Section 5-7-3.
1. wlancfg1.ini ~ wlancfg8.ini
Designate the Access Point SS_ID and the DT-X100 IP address.
These fi les are included in the DT-X100 folders shown below.
\FlashDisk\DIAG\WLAN
[WLAN]
WLANPOWER=1
POWERSAVE=1
WLANCFG=1
BancConfi g=1
RoamingRSSILever=-78
RoamingAvailableTime=60
RoamingRSSISpan=1
[STATIC]
SSID=PY-055_SS_test
ADHOC=0
[TCPIP]
DHCP=0
IPADDRESS=132.1.70.30
SUBNETMASK=255.255.255.0
DEFAULTGATEWAY=
DNS1=
DNS2=
WINS1=
WINS2=
Follow the above steps to create up to wlancfg8.(Do not use an overlapping IP address)
2. FLCE (Shot Cut)
Designate the IP address of the PC used for transmission.
This fi le is included in the DT-X100 folders shown below.
\FlashDisk\DIAG\WLAN
51#"\FlashDisk\DIAG\WLAN\FLCE.exe" /y={lan,132.1.70.41,}
LAN CABLE
Access Point
Access Point SS_ID
IP Address assigned to DT-X100
IP Address for the PC
— 56 —
Wireless
Transmission