Advertisement
Step 22
Refer to the enlarged diagram to identify the parts on the HINGES.
å
The DOORS may need some adjustments. Follow the text below to make
å
needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), loosen the mounting
screw several turns, then turn the adjusting screw in or out. Tighten the
mounting screw after making adjustments.
To adjust the DOORS up and down (vertical), loosen both vertical adjustment
å
screws. Move the DOORS up or down to the desired location. Tighten the screws
after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting screw one turn
å
and move the DOORS in or out, as needed. Tighten the mounting screw
after making adjustments.
Adjusting screw (horizontal)
Page 26
Mounting screw (depth)
(vertical adjustment)
404963
www.sauder.com/services
Advertisement
