Advertisement
Step 21
With someone's help, carefully stand your unit upright.
å
Before fastening the DOOR to your unit, be sure the
å
mounting screw is against the stops as shown in the right
diagram. If it isn't, loosen the mounting screw to slide it
against the stops. Then tighten the mounting screw.
Fasten the DOOR (S) to the LEFT UPRIGHT (G). Use the
å
screws in the HINGES. See the next step for adjustments.
Peel the FELT DISC from the FELT DISC CARD (SS). Stick a
å
FELT DISC on the DOOR where it comes in contact with the
CENTER UPRIGHT (H).
Fasten a KNOB (OO) and BACKPLATE (PP) to the DOOR (S).
å
Use a GOLD 1" MACHINE SCREW (ZZ).
Repeat this step for the other DOOR (S).
å
GOLD 1" MACHINE SCREW
(4 used for the KNOBS and BACKPLATES)
www.sauder.com/services
ZZ
SS
OO
PP
SS
G
S
H
404963
Pro Tip: Lift with your
legs. And, you know,
your arms.
Stop
Mounting
screw
Hinge
Page 25
Advertisement
