4.4
Alarms
Alarm conditions where the EES becomes inoperable will initiate a 250 hour timer. After 250 hours, the unit will
shut down until the system is repaired by a qualified technician. Once the alarm condition is corrected, the EES
Service Light will go from Amber to Green and the timer will be reset. Refer to
Refer to
Section 5.1
for a list of alarms and troubleshooting information.
1. From the Setup Screen, click on the AR-DOC tab.
2. Alarms can be read with the unit running or turned off, as long as battery power is hooked up.
Red: Active alarm
Blue: Alarm has been corrected
Green: Alarm has been cleared
Figure 4.6 ECM Service Tool - Alarms
4–5
Figure
4.6.
T-378