Mag Input - Marine Sea Scan Manual

Click the <Delete Cells> button when ready to remove the selected charts. To select
multiple charts, hold down the CTRL or SHIFT key while clicking on the charts.
Additional Charts
In addition to the S-57 charts, the Unlicensed and Licensed chart installers now include the World
Vector Shoreline (WVS) data. This data fills in where there is no S-57 ENC data. It is not nearly as
detailed as the S-57 charts; in fact, It generally is just an outline of the shore.

3.2.4.7.3.3 Mag Input

The Mag Input settings page lets the user add magnetometer data to the stream.
The Mag Input Settings Window
Mag Type: Lets the user switch between different SONAR systems.
Proton4
SeaSPY
866
880
ASCII
Port Number: Lets the user select which port the magnetometer is connected to.
Baud Rate: Lets the user select the baud rate at which the magnetometer sends and receives
information.
Refresh: Refreshes the list of the ports that have a connection.
The Test Window
© 2013 Marine Sonic Technology, Ltd.
Test: Allows the user to test the
connection. It will give a success or
failure message. Click on <OK> to close
the window.
Sea Scan Survey
The output will show on the Status Window of
®
Sea Scan Survey.
Magnetometer status
27