Table of Contents
Advertisement
Commissioning instructions
Mains Powered DAU Commissioning process
Carry out
and to the relevant standards and as per installation guidelines.
Ensure all the
connected to their intended sockets.
Ensure that the
on the MCB, see page 7.
Ensure cables of
blocks on the MCB, see page 8.
Check each
consistent with the number of End-of-Line resistors fitted, see page 9. If required
connect a Test microphone.
Connect the batteries and switch ON the mains supply to power up the Mains
Powered DAU, see page11 and page 12. Observe power up indications.
Conduct a
local buzzer are working, see page 15.
If necessary during commissioning the Mains Powered DAU you can disable the
local buzzer
It is VERY important to ensure the local buzzer is re-enabled on
leaving site and on completion of commissioning work.
Resolve any
see pages 17 to 19.
Ensure the location of all the Mains Powered DAUs in the Vigilon Compact VA system
are known and are fitted in accordance with the 'as fitted wiring drawings', use the
Find Device
Mains Powered DAU, see page 20.
Carry out
see page 21.
Connect the Commissioning Tool to the Compact VA panel and retrieve the
system. Configure the entire system and ensure all the
configuration
Test the system
Emergency messages and background music operate correctly, see page 28.
4
www.acornfiresecurity.com
Initial checks
to ensure the installation is to site specific requirements
internal parts
are securely fitted and all internal cables are
transformer cables
are connected to their respective sockets
external circuits
are connected to their designated terminal
speaker circuit resistance
lamp test
and ensure all the LEDs on the Main Powered DAU facia and
.
fault indications
given and ensure the Mains DAU is fault free,
function at the Vigilon Compact VA panel to find each
initial tests
to ensure faults are indicated at the Main Powered DAU,
are set to site specific requirements, see page 23.
cause and effect
and ensure Voice Alarm, PA, Auxiliary Messages,
www.acornfiresecurity.com
and ensure the measurements are
Mains Powered DAU
Advertisement
Table of Contents
