Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Discount Car Stereo Manuals
  4. Car Stereo System
  5. A2D-BKR
  6. Quick start manual

Discount Car Stereo A2D-BKR Quick Start Manual

Hide thumbs Also See for A2D-BKR:

Advertisement

Quick Links

Download this manual
Courtesy of: DiscountCarStereo.com
Serving the internet community since 1995
A2D-BKR
QUICK START MUSIC STREAMING INSTALLATION GUIDE FOR BECKER RADIOS WITH AUX MENU OPTION
Created October 1, 2015
Revised: November 2, 2021

Advertisement

loading

Related Manuals for Discount Car Stereo A2D-BKR

Summary of Contents for Discount Car Stereo A2D-BKR

  • Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 A2D-BKR QUICK START MUSIC STREAMING INSTALLATION GUIDE FOR BECKER RADIOS WITH AUX MENU OPTION Created October 1, 2015 Revised: November 2, 2021...

  • Page 2: Installation

    Becker radio was standard in many European luxury cars (e.g., Porsche, BMW, Mercedes, Land Rover, Ferrari etc.) and those looking to upgrade to Bluetooth without changing the radio, we offer the A2D-BKR Bluetooth receiver. The A2D- BKR allows these radio owners to stream music application from smartphone without wires.
  • Page 3 Radio connectors Warning: C2-C3 chambers are for optional CD changer and/or other accessories. C-1 chamber (YELLOW) is reserved for amplifier. The A2D-BKR adapter replaces any accessory connected to C-2-3 slots. Connect BLUE ISO plug from installation harness (See Fig. 4) to C-3 slot vacated in step 2 Fig.
  • Page 4 Optional AUX input Optional AUX allows users to connect and play portable audio devices such as MP3 players, Sat radio kits. etc. If this option was purchased, connect included 3.5mm male-male cable (See Fig. 5) to aux jack on module (See Fig. 6) and route cable to dash area or where aux device will reside (within 3 feet) Fig.
  • Page 5 Radios with ☼ button: (i.e., BE6104) Enabling AUX menu option One important step in this process is to enable the AUX function within the radio menu. Most Becker radios are pre-programmed to recognize the CD Turn radio “ON” changer connection and because of that you must perform the following steps 2.
  • Page 6 Nav Traffic radios Cascade Pro (i.e. BE7941) Press "radio" button to enter radio mode. To activate the External Device mode Press "Navi" and "F10" simultaneously Turn radio ON. Press "Next" until AUX input, Changer Res screen Press information button Press AUX to enable/disable. Turn rotary control/push (OK) button counterclockwise until System Settings appears at the top right of the display Press rotary control/push (OK) button...
  • Page 7 Becker DTM /High speed (i.e. BE-7892, BE7910) Pairing Pairing process varies from Phone to Phone but basic steps are the same. This process is done upon initial install and will not have to be repeated Press Sound button for more than 2 seconds Turn Ignition and radio “ON”...

  • Page 8: Operation

    Operation Optional remote control Optional smart remote control allows users to: Turn ignition and radio “ON” Control music wirelessly (Many Porsche and Ferrari radios can be turned ON without placing key 2. Activate Phone commands (Google play only.) in ignition; however, for this Bluetooth adapter to power up ignition 3.
  • Page 9 Frequent ask questions & troubleshooting Use smart remote to perform the following functions on any iOS7.0 and higher or Android 4.4 and higher. My vehicle has a CD changer. Does the A2D-BKR work in vehicles with CD changer? YES; but the CD changer, AUX or iPod adapter must be disconnected and AUX mode enabled through radio menu.
  • Page 10 Email support@discountcarstereo.com © 1995-2021-11-02 Discount Car Stereo, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders...