Related Manuals for Discount Car Stereo iP2D-BKR
Summary of Contents for Discount Car Stereo iP2D-BKR
- Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 A2D-BKR QUICK START MUSIC STREAMING INSTALLATION GUIDE FOR BECKER RADIOS WITH AUX MENU OPTION...
-
Page 2: Installation
PRODUCT SAFETY & DISCLAIMER READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY • This installation guide is provided as a GENERAL installation guide; some vehicles vary and may require additional steps. We do not accept responsibility for third party labor charges or modifications. - Page 3 To install: 1. Connect optional T-harness BLUE plug (Fig. 4b) to radio C-3 slot2. 2. Reconnect factory BLUE plug to BLACK iso socket on T-harness. Note: Only vehicles with radio cluster display (e.g., Ferrari) and/or factory Hands-fee kit requires T-harness Fig.
- Page 4 Optional AUX input Optional AUX allows users to connect and play portable audio devices such as MP3 players, Sat radio kits. etc. If this option was purchased, connect included 3.5mm male-male cable (See Fig. 5) to aux jack on module (See Fig. 6) and route cable to dash area or where aux device will reside (within 3 feet) Fig.
- Page 5 Radios with ☼ button: (i.e., BE6104) Enabling AUX menu option One important step in this process is to enable the AUX function within the radio menu. Most Becker radios are pre-programmed to recognize the CD Turn radio “ON” changer connection and because of that you must perform the following steps 2.
- Page 6 Nav Traffic radios Cascade Pro (e.g., BE7941) Press "radio" button to enter radio mode. Press "Navi" and "F10" simultaneously To activate the External Device mode Turn radio ON. Press "Next" until AUX input, Changer Res screen Press AUX to enable/disable. Press information button Turn right hand rotary control/push button OK counterclockwise until system settings appear at the top right of the display...
- Page 7 Becker DTM /High speed (e.g., BE-7892, BE7910) Pairing Pairing process varies from Phone to Phone but basic steps are the same. This process is done upon initial install and will not have to be repeated Press Sound button for more than 2 seconds Turn Ignition and radio “ON”...
-
Page 8: Operation
Operation Optional remote control Optional smart remote control allows users to: Turn ignition and radio “ON” Control music wirelessly (Many Porsche and Ferrari radios can be turned ON without placing key 2. Activate Phone commands (Google play only.) in ignition; however, for this Bluetooth adapter to power up ignition 3. - Page 9 Operation: Frequent ask questions & troubleshooting Use smart remote to perform the following functions on any iOS7.0 and higher or Android 4.4 and higher. My vehicle has a CD changer. Does the A2D-BKR work in vehicles with CD changer? YES; but the CD changer, AUX or iPod adapter must be disconnected and AUX mode enabled through radio menu.
- Page 10 Email support@discountcarstereo.com © 1995-2022-02-27 Discount Car Stereo, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders...
Need help?
Do you have a question about the iP2D-BKR and is the answer not in the manual?
Questions and answers