Download Print this page

Discount Car Stereo A2D-BKRCD Quick Start Manual

Advertisement

Quick Links

Courtesy of: DiscountCarStereo.com
Serving the internet community since 1995
A2D-BKRCD
QUICK START MUSIC STREAMING MODULE INSTALLATION GUIDE FOR BECKER WITH ANALOG CD CHANGERS

Advertisement

loading
Need help?

Need help?

Do you have a question about the A2D-BKRCD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Discount Car Stereo A2D-BKRCD

  • Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 A2D-BKRCD QUICK START MUSIC STREAMING MODULE INSTALLATION GUIDE FOR BECKER WITH ANALOG CD CHANGERS...
  • Page 2: Installation

    With the A2D-BKRCD installed, music streaming from smartphone, tablet, kindle etc. is possible while also retaining use of required CD changer. Keep in mind for the A2D-BKRCD module to work, vehicle must have a Becker radio and CD changer such as the CDC-3 (BE2660), BE7860 etc. which remains connected and operational.
  • Page 3 3. With radio removed press release tab on BLUE plug (See Fig. 4) and Warning: Becker radios are coded and will not operate without code. Do not disconnect from chamber (C-3) (See Fig. 3) proceed to step 6 if radio code is not available. 6.
  • Page 4 Warning: Unlike other European vehicles, BMW and Mercedes Pairing power/speaker plug is molded together (See Fig. 7) which means the standard power harness (See Fig. 6) does not apply. For these applications Pairing process varies among phones but the basic steps are the same. This we are including harness seen in Fig.8.
  • Page 5: Operation

    Operation Optional remote 1. Turn ignition and radio “ON” Optional remote control allows users to: 2. Press CD or button combination to enter CD changer mode Control music wirelessly (At least 1 disc must be loaded and remain in changer magazine) 2.
  • Page 6 Operation: Optional Noise Filter (NF3A) installation Use wireless remote to perform the following functions on any iOS7.0 and higher Noise filter connects to installation harness black plug. (NO need to cut factory or Android 4.4 and higher. wires) Filter installs between black plug (to radio) and module - If present, remove black tape from power harness (See Fig.
  • Page 7 Frequent ask questions & Troubleshooting you must continue to use device built-in controls and display. 5. Can I pair or save more than one device to the A2D-BKRCD? My 1999 Mercedes Benz has an Alpine radio and CD changer. Will I be YES;...