Hans Grohe AXOR Starck 10300000 Instructions For Use/Assembly Instructions page 4

6
Safety Notes
6 Gloves should be worn during installation to prevent
crushing and cutting injuries.
6 The shower system may only be used for bathing,
hygienic and body cleansing purposes.
6 The hot and cold supplies must be of equal pres-
sures.
Installation Instructions
• The fitting must be installed, flushed and tested after
the valid norms!
• The mixer can not used together with a continuous
flow water heater.
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Thermal disinfection:
anti-pollution function
The product is exclusively designed for drinking water!
4
English
max. 1 MPa
0,25 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
max. 70°C / 4 min
Assembly see page 31
Symbol description
Do not use silicone containing acetic acid!
Dimensions (see page 33)
Flow diagram (see page 33)

Rate of flow mixer

Rate of flow handshower
Operation (see page 35)
• Hansgrohe recommends not to use as
drinking water the first half liter of water
drawn in the morning or after a prolon-
ged period of non-use.
• Due to the design of the Bidette fittings,
a small amount of water will leak at the
outlet of the fitting when the hand shower
is running.
Cleaning
see enclosed brochure.
Spare parts (see page 36)
Test certificate (see page 38)