Table of Contents
Advertisement
26 April, 2002
4. Wait until the
Data In
5. Check that the massages
System
and
displayed.
NOTE: Do NOT turn the main switch off before
the messages disappear.
6. Wait until the
Data In
printer reboots automatically.
7. Close the front cover when "Close Front Cover" is displayed.
8. Confirm the firmware version by printing Configuration Page.
9. Return all printer settings that were changed in order to perform the upgrade
back to their original values.
5.4.5 ERROR RECOVERY
If a download attempt failed, try downloading the new firmware again using the
procedure described in section 5.4.4.
LED blinks.
Upgrading
Do Not Power Off
LED goes out. The
FIRMWARE UPDATE PROCEDURE
Upgrading System
are
Do Not Power Off
5-9
G082S912.WMF
Advertisement
Table of Contents
