Contents Supplied - Park DT-814175 Owner's Manual

Stand For Log Splitter Stand For Log Splitter Stand For Log Splitter Stand For Log Splitter
SAFETY WARNINGS & CAUTIONS SAFETY WARNINGS & CAUTIONS
SAFETY SAFETY WARNINGS & CAUTIONS WARNINGS & CAUTIONS
Please read the manual for
the stand before
assembling and using it.
Unplug the log splitter
before mounting the stand
to it.
Please keep the bleed
screw of the log splitter
tightened during the stand
assembly.

CONTENTS SUPPLIED

CONTENTS SUPPLIED
CONTENTS SUPPLIED CONTENTS SUPPLIED
1. Connecting Plate.......
2. Rear Legs.................
3. Front Leg -L...............
5. Connecting Tube........
6. Hardware Bag............
4. Front Leg -R...............
14
1 set
1 pair
1 set
1 set
1 set
1 set
ASSEMBLY ASSEMBLY
ASSEMBLY ASSEMBLY
Following the assembly instructions
below, you will mount the stand to the
log splitter in a few minutes.
1. Line up the holes on the front support
legs and the connecting plate. Insert the
M8x45 bolts each with a arc washer
through the holes from one side, then
secure with arc washers and nuts from
the other side.