Extension Cords; Inspect Your Log - Park DT-814175 Owner's Manual

wood chips or debris.

EXTENSION CORDS

EXTENSION CORDS
EXTENSION CORDS EXTENSION CORDS
Improper use of extension cords may cause inefficient
operation of the log splitter which can result in overheating.
Be sure the extension cord is no longer than 10m and its
section is no less than 2.5mm
to the motor.
Avoid use of free and inadequately insulated connections.
Connections must be made with protected material suitable
for outdoor use.
AVOID ELECTRICAL SHOCK AVOID ELECTRICAL SHOCK AVOID ELECTRICAL SHOCK AVOID ELECTRICAL SHOCK
After installation, the degree of protection of the BSI
approved plug and socket combination shall be IP44D at
least.
Note:
IP4XD means: the access probe of 1.0mm diameter, 100mm
length, shall have adequate clearance from hazardous parts.
IPX4 means: water splashed against the enclosure form any
direction shall have no harmful effects.
Check that the electric circuit is adequately protected and
that it corresponds with the power, voltage and frequency of
the motor. Check that there is a ground connection, and a
regulation differential switch upstream.
Ground the log splitter. Prevent body contact with grounded
surfaces: pipes, radiators, ranges, and refrigerator enclosures.
Never open the pushbutton box on the motor. Should this be
necessary, contact a qualified electrician.
Mark sure your fingers do not touch the plug's metal prongs
when plugging or unplugging the log splitter.
KEEP VISITORS AND CHILDREN AWAY KEEP VISITORS AND CHILDREN AWAY
KEEP VISITORS AND CHILDREN AWAY KEEP VISITORS AND CHILDREN AWAY
The log splitter must be always operated by one person only.
Other people should keep a safe distance from the work
area, especially when the log splitter is under operations.
Never use another people to help you with freeing jammed
log.

INSPECT YOUR LOG

INSPECT YOUR LOG
INSPECT YOUR LOG INSPECT YOUR LOG
Make sure there are no nails or foreign objects in logs to be
split. The ends of the logs must be cut square. Branches must
be cut of flush with the trunk.
DON'T OVERREACH DON'T OVER DON'T OVER DON'T OVER REACH REACH REACH
Floor must not be slippery.
Keep proper footing and balance at all times.
Never stand on log splitter. Serious injury could occur if the
tool is tipped or if the cutting tools is unintentionally
2
to allow sufficient current flow
3