Park DT-814175 Owner's Manual page 54

Before operating the log splitter, the Before operating the log split
Before operating the log split Before operating the log split
Bleed Screw should be loosened by Bleed Screw should be loosened by
Bleed Screw should be loosened by Bleed Screw should be loosened by
some rotations until air can go in and some rotations until air can go in and
some rotations until air can go in and some rotations until air can go in and
out of the oil tank smoothly. out of the oil tank smoothly. out of the oil tank smoothly. out of the oil tank smoothly.
Air flow thru the Bleed Screw hole Air flow thru the Bleed Screw hole
Air flow thru the Bleed Screw hole Air flow thru the Bleed Screw hole
should be detectable during the log should be detectable during the log
should be detectable during the log should be detectable during the log
splitter is under operations. splitter is under operations.
splitter is under operations. splitter is under operations.
Before moving the log splitter, make Before moving the log splitter, make Before moving the log splitter, make Before moving the log splitter, make
sure the Bleed Screw is tightened to sur e the Bleed Screw is tightened to
sur sur e the Bleed Screw is tightened to e the Bleed Screw is tightened to
avoid oil leaking from this point. avoid oil leaking from this point.
avoid oil leaking from this point. avoid oil leaking from this point.
FAILED TO LOOSEN THE BLEED FAILED TO LOOSEN THE BLEED FAILED TO LOOSEN THE BLEED FAILED TO LOOSEN THE BLEED
SCREW WILL KEEP THE SEALED AIR IN SCREW WILL KEEP THE SEALED AIR IN SCREW WILL KEEP THE SEALED AIR IN SCREW WILL KEEP THE SEALED AIR IN
HYDRAULIC HYDRAULIC
HYDRAULIC HYDRAULIC
COMPRESSED COMPRESSED
COMPRESSED COMPRESSED
DECOMPRESSED. SUCH CONTINUOUS DECOMPRESSED. SUCH CONTINUOUS
DECOMPRESSED. SUCH CONTINUOUS DECOMPRESSED. SUCH CONTINUOUS
AIR AIR AIR AIR COMPRESSION COMPRESSION COMPRESSION COMPRESSION
DECOMPRESSION WILL BLOW OUT THE DECOMPRESSION WILL BLOW OUT DECOMPRESSION WILL BLOW OUT DECOMPRESSION WILL BLOW OUT
SEALS OF THE HYDRAULIC SYSTEM SEALS OF THE HYDRAULIC SYSTEM
SEALS OF THE HYDRAULIC SYSTEM SEALS OF THE HYDRAULIC SYSTEM
AND CAUSE PERMANT DAMAGE TO AND CAUSE PERMANT DAMAGE TO
AND CAUSE PERMANT DAMAGE TO AND CAUSE PERMANT DAMAGE TO
THE LOG SPLITTER. THE LOG SPLITTER.
THE LOG SPLITTER. THE LOG SPLITTER.
8
ter, the
ter, the ter, the
SYSTEM SYSTEM BEING BEING
SYSTEM SYSTEM BEING BEING
AFTER AFTER BEING BEING
AFTER AFTER BEING BEING
15. Max Pressure Limiting Screw
DO NOT ADJUST THE MAX DO NOT ADJUST THE MAX
DO NOT ADJUST THE MAX DO NOT ADJUST THE MAX
PRESSURE LIMITING SCREW ! PRESSURE LIMITING SCREW !
PRESSURE LIMITING SCREW ! PRESSURE LIMITING SCREW !
Max pressure was set before the log Max pressure was set before the log
Max pressure was set before the log Max pressure was set before the log
splitter ex work and the max pressure splitter ex work and the max pressure
splitter ex work and the max pressure splitter ex work and the max pressure
limiting screw limiting screw is sealed with glue to limiting screw limiting screw
ensure the log splitter works under ensure the log splitter works under
ensure the log splitter works under ensure the log splitter works under
pressure no more than 6 6 6 6 tons. The pressure no more than
pressure no more than pressure no more than
setting setting
setting setting
mechanic mechanic
mechanic mechanic
instruments. instruments. instruments. instruments.
Unauthorized resetting will cause the Unauthorized resetting will cause the
Unauthorized resetting will cause the Unauthorized resetting will cause the
hydraulic pump fail to output enough hydraulic pump fail to output enough
hydraulic pump fail to output enough hydraulic pump fail to output enough
splitting splitting
splitting splitting
SERIOUS INJURY AS WELL AS DAMAGE SERIOUS INJURY AS WELL AS DAMAGE
SERIOUS INJURY AS WELL AS DAMAGE SERIOUS INJURY AS WELL AS DAMAGE
TO THE MACHINE . TO THE MACHINE . TO THE MACHINE . TO THE MACHINE .
WIRING DIAGRAM WIRING DIAGRAM WIRING DIAGRAM WIRING DIAGRAM
AND AND AND AND
THE THE THE
is sealed with glue to is sealed with glue to is sealed with glue to
was was done done by by
was was done done by by
with with
with with
pressure press ure or or
press press ure ure or or
tons. The
tons. The tons. The
qualified qualified
qualified qualified
professional professional
professional professional
RESULT IN RESULT IN
RESULT IN RESULT IN