Park DT-814175 Owner's Manual page 53

SET UP AND PREPARATION SET UP AND PREPARATION
SET UP AND PREPARATION SET UP AND PREPARATION
FOR OPERATION FOR OPERATION FOR OPERATION FOR OPERATION
Following the assembly directions below,
you will assemble the log splitter in a few
minutes.
1. Insert the wheel shaft on each side,
and then put on the wheels.
Secure them each with a washer and a
circlip, then put on the wheel covers.
2. Familiarize yourself with the controls
and features of this log splitter in the
illustrations.
1. Log Pusher
2. Work Table
3. Wedge
4. Lift Handle
5. Support Leg
6. Log Retaining Plates
7. Switch
8. Motor
9. Switch Box
10. Wheels for Minor Moving ONLY.
11. Bleed Screw
12. Oil Drain Bolt w/ Dipstick Hydraulic
13. Control Lever Guard
14. Control Lever
7