Hydraulic Diagram - Park DT-814175 Owner's Manual

HYDRAULIC DIAGRAM

HYDRAULIC DIAGRAM
HYDRAULIC DIAGRAM HYDRAULIC DIAGRAM
LOG SPLITTER OPERATION LOG SPLITTER OPERATION
LOG SPLITTER OPERATION LOG SPLITTER OPERATION
Lift the log splitter by the handles at
both ends and fix it using screws of
M8×50 on a 60 – 75cm high, stable, flat
and level work surface.
This log splitter is equipped with "ZHB"
control system that requires to be
operated by both hands of the user –
Left hand controls the hydraulic control
lever while right hand controls the
pushbutton switch. The log splitter will
freeze upon absence of either hand.
Only after both hands release the
controls, the log pusher starts to return
backward to the starting position. It is
recommended to release the switch first
and then the hydraulic control lever
when you want to return the log pusher.
The top folded lever guard is designed to
protect the hydraulic control lever from
accidental pushdown.
Never force the log splitter Never force the log splitter
Never force the log splitter Never force the log splitter
for more than 5 seconds by for more than 5 seconds by for more than 5 seconds by for more than 5 seconds by
keeping pressure on it to split keeping pressure on it to split
keeping pressure on it to split keeping pressure on it to split
excessively hard wood. excessively hard wood. excessively hard wood. excessively hard wood.
After this time interval, the oil under
pressure will be overheated and the
machine could be damaged. For such
extremely hard log, rotate it by 90
whether it can be split in a different
direction. In any case, if you are not able
to split the log, this means that its
hardness exceeds the capacity of the
o
to see
9