Specifications; Electrical Requirements - Park DT-814175 Owner's Manual

SPECIFICATIONS

SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS
Model Number Model Number
Model Number Model Number
Motor Motor Motor Motor
Diameter * Diameter *
Diameter * Diameter *
Log Capacity Log Capacity Log Capacity Log Capacity
Length Length Length Length
Splitting Force Splitting Force
Splitting Force Splitting Force
Hydraulic Pressure Hydraulic Pressure
Hydraulic Pressure Hydraulic Pressure
Hydraulic Oil Capacity Hydraulic Oil Capacity
Hydraulic Oil Capacity Hydraulic Oil Capacity
Length Length Length Length
Overall Size Overall Size Width Width
Overall Size Overall Size Width Width
Height Height
Height Height
Weight Weight
Weight Weight
* The diameter of the log is indicative – a small log can be difficult to split when it has
knobs or a particularly tough fiber. On the other hand, it may not be difficult to split
logs with regular fibers even if its diameter exceeds the max. figure indicated above.
* S3 40%, Intermittent periodic duty: time of one load cycle is 10 minutes, operation
time at constant load is 4 minutes, de-energized and at rest is 6 minutes.

ELECTRICAL REQUIREMENTS

ELECTRICAL REQUIREMENTS
ELECTRICAL REQUIREMENTS ELECTRICAL REQUIREMENTS
Connect the main leads to a standard 230V+10% (50Hz+1Hz) electrical supply which
has protection devices of under-voltage, over-voltage, over-current as well as a
residual current device (RCD) which maximum residual current rated at 0.03A.
Test 2 according to clause 18 of EN 60204-1 is to be verified under final installation.
CONTENS SUPPLIED CONTENS SUPPLIED CONTENS SUPPLIED CONTENS SUPPLIED
1. Log Splitter Frame ... ... ... ... ............1 set
2. Wheel... ... ... ........ ... .... ..................1 pair
3. Owner's Manual ... ... ... ........ ... ......1 pc
4. Hardware Bag, including... ... ... ..... ..1 set
5.Logsplitter Stand (only DT-814175) 1 set
6
230V~ 50Hz
16.5 ~ 52cm
DT-814175
2200W S3 40%
5 ~ 25cm
6 t
20.8 Mpa
3.5L
940mm
270mm
510mm
47.5 kg
IP54