Digitus OptiView DN-16028 Firmware Upgrade Procedure
Hide thumbs
Also See for OptiView DN-16028:
- User manual (14 pages) ,
- Quick installation manual (4 pages)
Advertisement
Advertisement
Table of Contents
Related Manuals for Digitus OptiView DN-16028
Summary of Contents for Digitus OptiView DN-16028
- Page 1 FIRMWARE UPGRADE PROCEDURES ® DIGITUS OptiView DN-16028...
- Page 2 1. Take out the CD in the color box and insert the CD to the Conmputer/Notebook. Please go to DN-16028 folder and find the “Search Utilty”. 2. Please make sure that the IP camera is connected to the same network domain as your Computer/Notetook.
- Page 3 4. Please key in “admin” as the account and password to enter the Camera Web User Interface. Then press “livestream mode (for Internet Explorer) to go to the livestream page. 5. Click the “tool” icon to get into the “Setting” page. ...
- Page 4 6. Please go to “Maintain” and browse to the new firmware (64.1.0.22-only-daemon.bin) and press “upgrade”. Please wait for 90 seconds for the camera to reboot. After re-boot, the IP address could be changed. So please use the utility to search the new IP address again.
Need help?
Do you have a question about the OptiView DN-16028 and is the answer not in the manual?
Questions and answers