Subscribe to Our Youtube Channel
Related Manuals for Digitus DN-16035
Summary of Contents for Digitus DN-16035
- Page 1 INTERNET PAN & TILT WIRELESS HD IP CAMERA Quick Installation Guide DN-16035...
-
Page 2: Minimum System Requirement
Thank you for purchasing this IP camera! Before you start to use this IP camera, please check the package contents. If anything is missing, please contact the dealer of purchase and return the package to claim for missing contents. Item Name Quantity Internet Camera Antenna (Wireless model only) -
Page 3: Camera Installation
Camera Installation Please follow the following instructions to set the camera up: Connect the Ethernet cable to your local area network, and connect the other end to the LAN jack of this IP camera. NOTE: You can skip this step if you plan to use wireless LAN only. - Page 4 Place the camera at a secure place, and point the camera to the place you wish to monitor. If you wish to hang the camera on the ceiling or wall, please use the tripod connector (located at the bottom of the camera, as shown on the right) to secure the camera.
- Page 5 Click ‘Next’ to continue, or click ‘Browse’ to select another folder / drive to install admin utility. Click ‘Next’ to continue. You can uncheck ‘Create a desktop icon’ and / or ‘Create a Quick Launch icon’ and correspnding item will not be created. Click ‘Install’...
- Page 6 Click ‘Finish’ to finish installation and start admin utility. Admin utility will search for all cameras available on your local network. You can click ‘Search Camera’ button to search for cameras on your network again. Search Camera icon When a (or more) camera is found, select it by mouse to highlight it, and then click ‘Browse Camera via Web’...
- Page 7 You’ll be prompted to input username and password. Username is ‘admin’ (can not be changed), default password is ‘1234’. In this menu, you have to assign an IP address and it’s Netmask, Gateway, and DNS to be used by the camera, so your computer can connect to it.
- Page 8 You’ll be prompted to input user name and password, click ‘OK’ button when finish. If you can’t see this login window, please go back to Admin Utility and click ‘Configure Camera’ icon to set the IP address of the camera before it can be connected.
- Page 9 You should be able to see the images captured by the camera now. For advanced functions, please refer to instructions given in user manual (on supplied CD-ROM)
Need help?
Do you have a question about the DN-16035 and is the answer not in the manual?
Questions and answers