HIKVISION AX Series Manual

Title: How to configure Alarm Notifications to Mobile Phone
( SMS or Voice call)
Product: AX Series Wireless Security Control Panel

Preparation

1. AX Series Wireless Security Control Panel,V1.0.4 or above
2. Internet Explorer
3. One SIM card and one Mobile Phone
How to Configure Alarm Notifications to Mobile Phone (SMS or Voice call)
When an alarm is triggered, if you want to send the alarm notification to mobile
phone（SMS or Voice call）, you can set the notification push parameters.
1. Put sim card into the card slot
1) Please turn off power of Wireless Security Control Panel.
2) Put sim card into the card slot.
3) Turn on Power of the Wireless Security Control Panel.
Note
If you inset the SIM card when the power on, you need restart the wireless control panel.

2. Configure Message Notifications

1) Click Communication Parameters → Message Notification.
2) Enable the target notification.
Alarms and Tampers
The device will push notifications when the zone alarm is triggered or the device tamper
alarm is triggered or restored.
Life Safety Alarms
The device will push notifications when fire alarm, gas alarm, or medical alarm is
triggered.
Maintenance and Faults Notification
The device will push notifications when any status in the system is changed.
Panel Management Notification
The device will push notifications when the user operate the device.
3) Set Mobile Phone Index, SIM Card No. And enable Notification Type (SMS or Phone call).
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: +86-571-8807-5998 • Fax: +1 909-595-0788
© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.
E-Mail:
support@hikvision.com
Version:
• www.hikvision.com
v1.1 Date: 07/18/2019
Page: 1 of 3