Download Print this page
HIKVISION HiLook HA-ALARM-P48 How-To
HIKVISION HiLook HA-ALARM-P48 How-To

HIKVISION HiLook HA-ALARM-P48 How-To

How to activate hybrid alarm system via keypad

Advertisement

Quick Links

How to Activate HiLook Hybrid Alarm System via Keypad
Device Information
Device
Firmware Version
HA-ALARM-P48
Configuration
Step 1. Create a New Password for Hybrid Alarm System
The default password for HiLook Hybrid Alarm System is the last 6 digits of its Serial Number. The
new password is used for Hik-Connect login, which should contain Uppercase Letters, Lowercase
Letters and Numbers.

Advertisement

loading
Need help?

Need help?

Do you have a question about the HiLook HA-ALARM-P48 and is the answer not in the manual?

Questions and answers

Summary of Contents for HIKVISION HiLook HA-ALARM-P48

  • Page 1 How to Activate HiLook Hybrid Alarm System via Keypad Device Information Device Firmware Version HA-ALARM-P48 Configuration Step 1. Create a New Password for Hybrid Alarm System The default password for HiLook Hybrid Alarm System is the last 6 digits of its Serial Number. The new password is used for Hik-Connect login, which should contain Uppercase Letters, Lowercase Letters and Numbers.
  • Page 2 Step 2. Create New Users Press default password + to log into the panel Settings -> User Management -> Add User -> Create User Name -> Create Keypad Password (for this user to Arm/Disarm system)
  • Page 3 Step 3. Enroll Tag for Users Once the user has been created, a tag can be enrolled for this user, which allows the user to arm/disarm system by swiping tag. Tag Management -> Add Tag -> Swipe the Tag (in the middle area of the keypad) -> Input Tag Name...
  • Page 4 Step 4. Link Tag to Users Select the tag -> Choose Linked User...
  • Page 5 Step 5. Add Device on Hik-Connect Mobile App Press default password + to log into the panel Settings -> Network Management -> Cloud -> Reset a new Verification Code -> Scan QR Code via Hik-Connect -> Input the verification code just setup ->...
  • Page 6 Step 6. Adjust Date and Time Press default password + to log into the panel Settings -> Date & Time...