Surface Read-Out Unit Set-Up - Ace Reliance 1K Operation Manual

ACE RELIANCE SENSOR OPERATIONS MANUAL

8. Surface Read-Out Unit Set-up

8.1. Connect a surface cable (from a junction box) and the DC power cable to the ACE Optix SRU.
Figure 35
Power and single wire connections for ACE Optix
8.2 ACE Downhole offers a GPS receiver. If AC mounted in a metallic container it's possible the internal GPS will
not receive a signal, in this case the ACE Optix external GPS receiver may be plugged into the front of the ACE
Optix case as shown in the figure 36 below.
DC power cable
input
V2.4
Signal wire
Ground wire
Signal cable input
(from a junction
box)
20 | P a g e