Mesh Intercom Repeater Mode - Sena MESHPORT RED Quick Start Manual

4.5 Mesh Intercom Repeater Mode

The MeshPort Red can be used as a Mesh Intercom
Repeater without Bluetooth pairing with a Smartphone or
Tablet PC.
1. Execute Factory Reset.
2. Turn on the MeshPort Red and triple-tap the Multi-
function Button during the initial Bluetooth pairing.
3. The MeshPort Red will operate in Mesh Intercom
Repeater Mode.
•
In Mesh Intercom Repeater Mode, Mesh Intercom
will start automatically when the power is on.
Note:
•
In Mesh Intercom Repeater Mode, only the following
features can be executed:
– Power on/off
– Factory Reset
•
If you want to pair with the Smartphone or Tablet PC,
execute Factory Reset and proceed with Bluetooth
pairing, referring to section 4.2 on page 14.
USING THE MESHPORT RED
19