Checking The Battery Level; Adjusting The Mesh Intercom Volume - Sena MESHPORT BLUE Quick Start Manual

2.4 Checking the Battery Level

When the MeshPort Blue is powering on, the red LED
flashes rapidly indicating the battery level.
4 flashes = High, 70~100%
3 flashes = Medium, 30~70%
2 flashes = Low, 0~30%
Note:
•
The battery performance may be reduced over time
with usage.
•
Battery life may vary depending on conditions,
environmental factors, functions of the product in use,
and devices used with it.

2.5 Adjusting the Mesh Intercom Volume

You can raise or lower the Mesh Intercom volume by using
the Sena MeshPort App.
Mesh Intercom volume is set and maintained even when
the MeshPort Blue is rebooted.
GETTING STARTED
11