Reset Setting; Firmware - Berger & Schroter 32134 User Manual

4.25 Reset settings
This function can restore the camera's factory default parameters. It can be used if
the camera is not set correctly. And it will not delete camera and memory card data
(Pic4-21).
1. Press (MENU) key to shift to the "Settings" menu;
2. Press (UP) or (DOWN) key to select "Default", press (OK) key to enter into the sub-
menu interface;
3. In the sub-menu interface, press (UP) or (DOWN) key to select whether or not reset
the camera's default:Yes / No.
4. After setting, it will back to "Settings" menu automatically.
Pic 4-25
Settings
Reset setings
Version
MENU Back

4.26 Firmware

This function allows users to view the current version number of the camera and can
help users upgrade to the latest firmware (Pic4-22).
1. Press (MENU) key to shift to the "Settings" menu;
2. Press (UP) or (DOWN) key to select "Firmware", press (OK) key to enter into the
sub-menu interface;
3. In the sub-menu interface, press (UP) or (DOWN) key to select desired option: Ver-
sion.
4. After setting, press (OK) key to back to "Settings" menu.
OK Select
Settings
Reset setings
Version
MENU Back
59
Pic 4-26
OK Select