Ir Brightness; Target Recording Time - Berger & Schroter 32134 User Manual

4.9 IR Brightness

This function is to set the emission brightness of the infrared lamp, the user can
choose the appropriate luminance option according to the operating environment
(Pic4-8).
1. Press (MENU) key to shift to the "Settings" menu;
2. Press (UP) or (DOWN) key to select "IR Brightness", press (OK) key to enter into
the sub-menu interface;
3. In the sub-menu interface, press (UP) or (DOWN) key to select desired bright- ness:
Economics/Normal/Highlight.
4. Press (OK) key to confirm saved and back to "Settings" menu, press (MENU) key
to back to main interface.
Pic 4-9
Settings
Pir interval
Pir sensitivity
MENU Back
Notice:
The IR brightness has a significant impact on battery life and night vision of
the camera. While choosing high brightness, more power is consumed, but
night vision effect is clearer. While choosing low brightness, the night vision
effect is poorer, but more power is save.

4.10 Target recording time

This function could set the monitoring period and the time to start/end to take
photo. When "Time lapse" off, and turn on " Target recording time" , during this
period of time, the PIR sensor could work; out of this period, the PIR sensor will
not work (Pic4-9).
1. Press (MENU) key to shift to the "Settings" menu;
2. Press (UP) or (DOWN) key to select "Stamp", press (Target recording time)
key to enter into the sub-menu interface;
3. In the sub-menu interface, press (UP) or (DOWN) key to select : ON / OFF;
choose "OFF" and press (OK) key to confirm, there is no target recording time;
Choose "ON " and press (OK) key to confirm , it could set the time to start or end
the target recording time.
OK Select
Settings
Pir interval
Pir sensitivity
IR birghtness
MENU Back
51
Pic 4-10
OK Select