Photo Mode Interface; Video Mode Interface - Berger & Schroter 32134 User Manual

3.1.5 Power off
When shutting down, you must operate in the following order:
When (Slide) key is "ON" gear, press (Slide) key to "TEST" gear first, the camera
displays the starting screen and then enters into the photo preview. Then, press
(Slide) key to "OFF" gear, the camera will be powered off.
When (Slide) key is in the "TEST" gear, move (Slide) key to "OFF" gear, the camera
will be turned off.
After shutdown, please wait 3 seconds before powering on again.
Notice:
If the camera is working when pushing (Slide) key, the camera will automati-
cally save the file.

3.2 Photo mode interface

Press (Slide) key to "TEST" gear, and
default mode is "Photo" mode. At this
time, the following icon will be dis-
played on the screen (Pic 3-2) :
Pic 3-2
1 Photo mode indicator
2 Photo resolution indicator
3 Numbers of remaining photos
4 SDcard indicator
5 Battery capacity indicator
6 Environment temperature indicator
7 Time indicator
8 Date indicator

3.3 Video mode interface

In photo mode, the (Slide) key is on
"TEST" gear, press (Slide) key to
switch to " Video "mode. The following
icon will be displayed on the screen
(Pic3-3) :
1 Video mode indicator
2 Video resolution indicator
3 Remaining video length indicator
4 SD card indicator
5 Battery capacity indicator
6 Environment temperature indicator
7 Time indicator
8 Date indicator
46
Pic 3-3