Bunn -O-MATIC ULTRA-1 Service And Repair Manual page 17

TROUBLESHOOTING (cont.)
Freezes, but not
thick enough
Ambient
Too much
Adjust thickness Brix ratio
temperature
alcohol in
screen higher too high
too hot
product
Recommended
Check for slightly
Adjust for indoor
bent auger shaft
product use only
pins and/or weak
torsion springs.
Check for dirty
or worn seals and
bushings.
No hood lamps
Is dispenser in
No Yes
"DAY" mode?
Set into
Is circuit breaker
Yes
No
"DAY" mode
tripped?
Verify all 4 bulbs are 912
Check lamp circuit
series & reset breaker
17
41084 102709