Safety Considerations - ETC High End Systems SolaPix 37 User Manual

Automated luminaire
Hide thumbs Also See for High End Systems SolaPix 37:
Table of Contents

Advertisement

Safety Considerations

To ensure safe operation, follow the safety instructions and warning notes in this user manual.
The SolaPix 37 is intended for professional use only. Not for residential use. Read the
entire manual before using this equipment.
Contact your ETC authorized dealer or Technical Services before performing any service in
order to maintain warranty coverage.
Symbols used on the product label are defined below:
The luminaire must be installed at least 1.0 m
1.0 m
(3.28 ft) away from all lighted objects.
General warning
Do not stare at the operating light source.
This product should not be discarded as unsorted
waste but must be sent to separate collection
facilities for recovery and recycling.
Operate indoors only, not where this product
would be exposed to the weather.
WARNING:
This equipment is designed for operation by qualified personnel only.
Replace fuses with the specified type and rating only. See
Make sure that the available voltage is within the stated range. See
page 11
Do not use this fixture with a damaged power lead (cord set). If the
lead is damaged, it must be replaced by a qualified technician with an
equivalent type before use. Contact your local authorized dealer for
spare power leads.
Do not use this fixture if the lens is damaged. Damaged lenses must be
replaced before use. Contact your local authorized dealer for a
replacement.
Do not mount the fixture on or near flammable surfaces.
Minimum distance from fixture head to combustible materials: 0.1 m
(4.0 in).
Minimum distance to lighted objects: 1.0 m (3.28 ft).
Safety Considerations
Note the following safety warnings before use:
.
Le luminaire doit être installé à au moins 1.0 m
(3,28 pi.) de tout objet éclairé.
Avertissement général
Ne pas regarder la source de lumière lorsqu'elle
fonctionne.
Ce produit ne doit pas être jeté avec les déchets
ménagers mais doit être déposé dans une collecte de
déchets électroniques ou dans un point de collecte.
Ne fonctionne qu'à l'intérieur, pas là où ce produit
serait exposé aux intempéries.
page 28
.
3

Advertisement

Table of Contents
loading

Table of Contents