Table of Contents
Advertisement
Navigate: Main Menu → Address → Pixel Module
The Pixel module is an optional feature. Select Disable in the Mode menu to turn off the
module.
Settings
Mode
Source
Address
Universe
Configure the Fixture
Value
Description
Select how the Pixel module is implemented:
•
Independent
•
Compound
•
•
Disable
•
•
The default mode is Disable.
Select the control source for the Pixel module.
Note: This option is only available when the Mode
DMX
•
selection is set to Independent. When you set the
Art-Net
•
module to Compound mode, the Source is inherited
sACN
•
from the Flex module (or the Base module if the Flex
module is disabled).
Set the DMX address for the Pixel module.
Note: This option is only available when the Mode
selection is set to Independent. When you set the
module to Compound mode, the Address is inherited
001-xxx
from the Flex module Address (Flex module
Address+17). If the Flex module is disabled, then the
Address is inherited from the Base module Address
(Base module Address+21).
When using Art-Net or sACN control source, set the
universe.
Note: This option is only available when the Mode
000-255
selection is set to Independent. When you set the
module to Compound mode, the Universe setting is
inherited from the Base module.
Compound - the module inherits its settings from
one of the other modules. See the
and
Universe
settings for details.
Independent - the addressing and control of the
module are independent of the other modules.
Disable - the module is off.
Source
Address
,
,
19
Advertisement
Table of Contents
