Safety Cut-Out; Cleaning And Maintenance - Kalorik BRITTO BR JK 46526 MT Instruction Manual

• The kettle will not re-boil until the kettle is switched on again.
• The kettle may be stored on the power base when not in use.
• Always disconnect the power supply when not in use.
• When pouring a large quantity of hot water, pour slowly and do not
incline the kettle past the horizontal line to avoid burns and injuries.

SAFETY CUT-OUT

This cordless water kettle is protected with an automatic safety
•
device if accidentally switched on without water in the kettle.
If this happens, switch off the appliance by putting the switch in the
•
OFF position and wait about 10 minutes for the element to cool.
Then pour in enough cold water to cover the element. This will reset
the safety device.
The kettle may then be used as normal.
GET MORE OUT OF YOUR PRODUCT
Sign up for the Kalorik email mailing list on www.kalorik.com to receive
special offers and connect with us on social media for daily inspiration.

CLEANING AND MAINTENANCE

Before attempting any cleaning operation, make sure the
•
appliance is switched off, unplugged from the supply socket and
fully cooled down.
To clean the exterior surfaces, simply wipe over with a soft, damp
•
cloth and dry thoroughly.
Never use abrasive products, powders or scouring pads.
•
Under no circumstances shall the jug kettle or its power base be
•
immersed in water.
To remove mineral deposits from the water kettle, use products
(decalcifying solutions) made especially available for this purpose.
Make sure to use a type recommended for kettles or coffee makers.
Follow the guidelines as recommended by the manufacturer of the
de-calcifying solution. Rinse well.
www.KALORIK.com
8
BR JK 46526 MT- 200605