Safety; Showroom Program; Factory Default - Miele M 7240 TC Operating And Installation Instructions

If you attempt to start a cooking
process without opening the door first,
the Place food in oven
on the display.
There may not be any food inside the
microwave oven yet, given that you
have not opened the door for a long
time (approx. 20 minutes). Confirm the
prompt with OK or by opening and
closing the door and selecting the
 sensor control.

Safety

Sensor lock
The sensor lock prevents the cooking
process from being switched off by
mistake or settings from being
changed. When activated, the sensor
lock takes effect a few seconds after a
cooking process has been started,
thereby disabling all sensor controls
and fields on the display with the
exception of the  On/Off button.
- On
The sensor lock is active. Touch the
OK sensor control for at least
6 seconds to deactivate the sensor
lock for a short period of time.
- Off
The sensor lock is not active. All
sensor controls react to touch as
normal.
System lock 
The system lock prevents the
microwave oven from being switched
on inadvertently.
The timer can still be used when the
system lock is active.
prompt will appear
The system lock will remain activated
even after a power outage.
-
On
The system lock is now active.
Before you can use the microwave
oven, touch the OK sensor control for
at least 6 seconds.
- Off
The system lock is now deactivated.
You can use the microwave oven as
normal.

Showroom program

This function enables the microwave
oven to be demonstrated in showrooms
without heating up. Do not activate this
setting for domestic use.
Demo mode
If you have Demo mode activated,
Demo Mode on. Appl. will not heat up.
appear when you switch on the
microwave oven.
-
On
To activate Demo mode, touch the
OK sensor control for at least
4 seconds.
- Off
To deactivate Demo mode, touch the
OK sensor control for at least
4 seconds. You can use the
microwave oven as normal.

Factory default

- Reset
All changes made will be retained.
- Do not reset
All modified settings will be reset to
the factory default settings.
Settings
will
41