Page 1
*INSTALLATION* 11195170-01 Installation Tall unit installation When building in the appliance, ensure that there is adequate ventilation to the front of the appliance. Do not obstruct the air vents with any objects. Lifting the microwave oven by the door handle could cause damage to the door.
Page 3
*INSTALLATION* 11195170-01 Installation Tall unit connection 451,5 a Front view b Mains connection cable, length = 1,600 mm c No connections permitted in this area...
Page 4
*INSTALLATION* 11195170-01 Installation Base unit connection 451,5 a Front view b Mains connection cable, length = 1,600 mm c No connections permitted in this area...
*INSTALLATION* 11195170-01 Installation Carrying out installation The appliance must be built in before it can be used. Align the appliance. Open the appliance door and secure the appliance into the side walls of Slide the appliance into the niche. the furniture unit using the screws Feed the cable with the plug through provided.
If the connection cable is damaged, it must only be replaced with a specific connection cable of the same type (available from Miele) in order to avoid a hazard. For safety reasons, such replacement may only be carried out by a qualified and competent technician or Miele.