Changing Values And Settings For A Cooking Process; Changing The Microwave Power Level; Setting Additional Durations - Miele M 7240 TC Operating And Installation Instructions

With microwave power level 
(900 W), the cooking duration is
limited to 15 minutes.
The other microwave power levels
allow you to set a cooking duration of
up to 90 minutes.
Operating the microwave continuously
at full power may result in the power
level being reduced by the overheating
protection (see "Frequently Asked
Questions").
 Select the  sensor control.
The cooking process starts.
At the end of the cooking duration,
will appear.
You can also keep the food warm at
the end of the cooking process (see
"Settings – Keeping Warm").
 After cooking, select the sensor
control for the selected operating
mode to end the cooking process.
 Take the food out of the oven.
 Switch off the microwave oven.
Changing values and settings
for a cooking process
Depending on the operating mode, you
can change the values or settings for a
cooking process as soon as it is
running.

Changing the microwave power level

You can use sensor controls 
through  to change the microwave
power level during a cooking process.
 Select the required microwave power
level.
The cooking process continues running
End
without interruption for the remainder of
the cooking duration with the new
microwave power level.

Setting additional durations

Cooking results can be adversely
affected if there is a long delay
between the food being placed in the
oven and the start of cooking. Fresh
food can change color and even
spoil.
Select as short a time as possible
until the start of the cooking process.
You have placed the food in the oven
and selected an operating mode.
By entering
via the  sensor control, you can
automatically switch the cooking
process off or on and off.
Operation
Duration , Finish at , or Start at
43