Connecting The Drawer Kick Cable - Epson TM-T20IIIL Technical Reference Manual

Pin assignments
Pin number Signal name
1 Frame GND
2 Drawer kick drive signal 1
3 Drawer kick open/close signal
4 +24 V
5 Drawer kick drive signal 2
6 Signal GND

Connecting the Drawer Kick Cable

• Use a shield cable for the drawer kick cable.
• When using cash drawer, make sure to use the power supply for printer (connector pins 4).
• Do not insert a telephone line into the drawer kick connector.
WARNING
Doing so may damage the telephone line or printer.
Connect the drawer kick cable to the drawer kick connector by pressing firmly until the connector clicks into
place.
Direction
-
Output
Input
-
Output
-
Chapter 2 Setup
6 5 4 3 2 1
24