Bosch Rexroth IndraControl VSB 40.1 Project Planning Manual page 39

DOK-SUPPL*-VSB*40.1***-PR03-EN-P
Rexroth IndraControl VSB 40.1 Control Cabinet PC
4. In the left side of this tab you can select which monitor should be ad‐
dressed by clicking on the corresponding icon, provided that an external
monitor is connected.
● Monitor: only the external monitor is addressed
● Notebook: only the screen of the connected VDP is addressed
● Intel(R) Dual Display Clone: both screens are addressed
5. After clicking on OK, a further window will open in which the selection has
to be confirmed by clicking on OK once again. Otherwise, the monitor
selection is not applied.
Fig.6-4: Confirming desktop changes
If the connected external monitor or the connected VDP is black, as
the corresponding graphics driver is not activated, you can also se‐
lect the wished action "blindly" by using the shortcuts listed in the
Hot keys tab (see the following figure).
Thereby, also the Monitor corresponds to the external monitor and
Notebook to the VDP.
The shortcuts can only be activated if a user is logged in!
Bosch Rexroth AG
Display and Operating Components
37/83