Advertisement
Figure 5: RA-3 Right Angle Feed-Thru
D. Installing and Wiring the Charge Controller (see Morningstar 'Operator's Manual' for additional
information)
Figure 6: Charge Controller
1. Select a suitable location for the installation of the regulator. Although the regulator is potted for vibration
and protection from the elements/foreign contaminants, a location inside the vehicle such as the cab or other
protected compartment is recommended (operating temperature range: -40 to +85° C). The regulator should
be mounted to a vertical surface and have free space around it for cooling. Use the four #10, ½" sheet metal
screws provided. Use a 9/64" drill bit for the pilot hole.
Note: The 'LOAD' teminals are not used in this application.
P.O. Box 1306
Newport Beach
California 92663
Note: Add sealant to the fitting's screw hole, install screws.
www.newmarEVpower.com
RA-3
Roof Top
Unused Terminals
E-Mail: techservice@newmarpower.com
7
Phone: 714-751-0488
Fax: 714-957-1621
Advertisement
