Advertisement
0.0 Product Overview
This Solar Charging System is designed for use in emergency vehicles and other heavy duty commercial
mobile applications. This mounting system is heavy duty and includes shock mounts to survive in high
vibration environments. The mounting kit has parts that accomodates several variations of installations,
thus all parts may not be used. If you have suggestions for additional parts that we could provide to ease
installation, please let us know by emailing Techservice@newmarpower.com.
1.0 Unpacking
The Solar Charging System is shipped complete in one carton:
If any items are missing, please contact yoiur distributor or Newmar immediately.
WARNING: WHEN SOLAR PANEL IS TAKEN OUT OF ITS SHIPPING CARTON, DO NOT REMOVE PROTECTIVE
CARDBOARD TAPED TO SOLAR PANEL UNTIL THE SOLAR PANEL IS INSTALLED AND WIRED TO THE
CONTROLLER. The solar panel is an energy source. Once cables are attached to it and the panel is exposed to
a light source the cables become live. Bare or exposed copper conductors can short during wire preparation &
routing, creating hazardous sparks and possible damage to solar panel. Leave protective cardboard in place
until installation is 100% complete.
2.0 Materials Provided
1 x Manual-Solar Charging System
1 x Morningstar Regulator; 10 amp, 12 volt, model SS-10, with instructions in box
20' x Cable 12/2 Blk-Red; grey jacket, 105C
Accessory Parts Bag:
1 x RA-3 Right Angle Thru-Dex Fitting (cable feed-thru for vehicle roof)
1 x Fuse Auto 15 Amp (battery fuse)
1 x Fuseholder Inline; ATC/ATO, 12 AWG, Red (battery fuse)
4 x Cable Clamp; nylon, adhesive, black
1 x Cord Grip; NPT-1/2", Blk, 11-6 MM (pass cable through roof/firewall)
4 or 6 x Z Bracket (mount solar panel to vehicle roof top): 4 required for models: SOL-20, 45, 65, 80 & 100;
6 required for model: SOL-120
8 or 12 x Machine Screw; Hex Head SS 1/4"-20 X 5/8" (mount Z brackets to roof top and solar panel)
4 x Sheet Metal Screw; Phillips Pan Head, SS #10-1/2" (mount controller)
8 or 12 x Nut Nylock, 1/4"-20 stainless steel
12 or 18 x Washer Flat, 1/4" stainless steel
4 or 6 x Nutsert 1/4"-20 Zinc-Steel (optional shock mount feet mounting tool required)
2 x Butt Connector Term. Insul. #1210GA (battery fuse holder wiring)
4 x Fork Term; #1210GA INS #8 Screw (controller wiring)
P.O. Box 1306
Newport Beach
California 92663
www.newmarEVpower.com
Phone: 714-751-0488
Fax: 714-957-1621
E-Mail: techservice@newmarpower.com
2
Advertisement
