Protecting The Device Against Damage - Telestar DIRA S 20C Manual

2. SAFETY INSTRUCTIONS
> Only connect the radio to a properly installed socket
with 220–240 V AC at 50–60 Hz.
> Place the radio on a firm, level surface.
> The device consumes power in standby mode.
To completely disconnect the device from the mains,
the power adapter must be unplugged from the socket.

2.5. Protecting the device against damage

NOTE!
> Unfavourable environmental conditions such as
moisture, excess heat or a lack of ventilation may
damage the device.
> Only use the device in dry rooms.
Avoid the direct vicinity of: heat sources, such as
radiators, naked flames such as candles, and devices
with strong magnetic fields such as
speakers.
Do not expose the device to extreme conditions
such as direct sunlight, high
humidity, moisture, extremely high or low
temperatures, naked flames.
> Ensure sufficient distance from other
objects to prevent the device from being obstructed so
that sufficient air ventilation is guaranteed.
> Avoid direct sunlight and unusually dusty locations.
> Do not place any heavy objects on the device or the
power adapter.
98
EN