Connecting The Device; Protecting The Device Against Damage - Telestar DIRA M 6i Operating Instructions Manual

2. SAFETY INSTRUCTIONS

2.4. Connecting the device

> Only plug the device into properly installed, earthed and
electrically secured power sockets.
> Please keep the power source (socket)
easily accessible.
> Do not kink or crush any cable connections.
> Before using the device, check whether the voltage
specification on the device corresponds to
your local power voltage. The specifications on the
power unit must correspond to the local power grid.
> Only plug the device into a properly installed grid socket
with 220-240 V alternating current, 50-60 hz.
> Place the radio on a firm, level surface.
> The device consumes power in standby mode.
To fully switch off the device, the power plug must be
pulled from the socket.

2.5. Protecting the device against damage

NOTE!
> Unfavourable surrounding conditions, such as moisture,
excessive heat or a lack of ventilation may
damage the device.
> Only use the device in dry rooms.
> Avoid the direct vicinity of: heat sources, such as
radiations, open fires (e.g. from candles),
devices with a strong magnetic field, such as
loudspeakers.
94
EN