Installation; General Operating Instructions; Preparing The Remote Control - Telestar DIRA S 20C Manual

6. INSTALLATION

6.1 General operating instructions

> Switch the device on or off using the standby
button on the device or the remote control.
> You can use the VOL+ button on the remote control or
turn the knob on the device to increase the volume.
You can use the VOL-button on the remote control or
>
turn the knob on the device to decrease the volume.
> You can use the ▼▲ buttons or the
control knob to select menu items.
> Use the ENTER button on the remote control or press
the knob on the device to confirm your selection.

6.2. Preparing the remote control

Remove the battery transport lock on the remote control. To do
so, pull out the plastic tab on the battery housing in the remote
control. This establishes battery contact.
To replace the remote control battery, open the battery compart-
ment on the back of the remote control.
Pull the battery compartment out of the remote control.
Remove the battery and insert a new battery of the same type.
There is a risk of explosion if not used properly!
111
EN