Connecting The Device - Telestar DIRA S 20C Manual

2. SAFETY INSTRUCTIONS
In this case, wait about an hour before using it.
> Unplug the device from the power socket if you are
absent for a longer period and during thunderstorms.
Make sure that contact with moisture, water or spray is
avoided and that no objects filled with liquids - e.g. vases
- are placed on or near the device or its power adapter.
> If foreign bodies or liquids get into the device or the
power adapter, pull the power adapter out of the socket
immediately. Have the device checked by
qualified personnel before you use it again.
Otherwise, there is a risk of electric shock.
> Make sure that the device and the power adapter are
not exposed to dripping or splashing water
and that there are no naked flames
(e.g. burning candles) near the device or the power
supply.
> The power adapter must never be touched or handled
with wet or damp hands.

2.4. Connecting the device

> Only connect the device to a properly installed, earthed
and electrically protected socket.
> Please ensure that the power source (socket)
is easily accessible.
> Do not kink or crush any cable connections.
> Before using the device, check whether the
voltage specification on the device corresponds to
local mains voltage. The information on the power
adapter must correspond to the local mains supply.
97
EN