Edit Timer; Standby Mode - Telestar DIRA S 20C Manual

7. SETTINGS
To deactivate the alarm until the following day,
press the Standby/Power button on the device.

7.2.5. Edit timer

In this menu, you can edit a set recording timer. Please read
chapter 8.14.

7.2.6. Standby mode

This function lets you adjust the display during standby
mode. Use the ▼▲ buttons on the remote control or the knob
on the device to select Standby mode in the menu and press the
ENTER button on the remote control or confirm by pressing the
knob on the device.
Select your desired function then confirm by pressing the
knob on the device or the OK button on the remote control.
Eco standby
In this mode, the device consumes very little power when in stand-
by mode. The time is not displayed in this standby mode.
125
EN