6. SETTINGS
Set the volume in the next line,
with which the alarm clock should be activated.
In the Beep line you can decide whether the
alarm clock should sound with a signal tone, or whether the alarm
should sound with an Internet radio station.
Please note that when you select an Internet radio station, at least
one favourite station must be saved.
To stop an alarm, press the STANDBY button
on the device.
To activate the snooze function, press
the control dial on the device when the alarm sounds.
This pauses the alarm for 5 minutes.
The alarm is reactivated after 5 minutes.
To deactivate the alarm until the next day, press
the Standby/Power button on the device.
6.2.5. Edit timer
In this menu you can edit a set recording timer. Please read
chapter 7.12 on this.
6.2.6. Standby mode
This function lets you adjust the display during standby
mode.
Use the dial on the device to select the menu item
Standby mode and confirm by pressing the dial.
104
EN