Installation; General Operating Instructions; Preparing The Remote Control - Telestar DIRA S 24 CD Operating Manual

6. INSTALLATION

6.1. General operating instructions

> Switch the device on or off using the standby button
on the remote control or on the device,
> You can increase the volume using the VOL+ button
on the remote control or by rotating the dial on the device.
You can decrease the volume using the VOL+ button
>
on the remote control or by rotating the dial on the device.
> The menu items can be selected using the ▼▲ buttons
or via the rotary dial.
press the ENTER button on the remote control or
>
by pressing the dial on the device you can confirm a selection.

6.2. Preparing the remote control

Remove the battery transport lock on the remote control. To do this, pull out
the plastic tab on the battery case of the remote control.This establishes
battery contact.
To replace the remote control battery, open the battery compartment on the
back of the remote control.
Pull the battery compartment out of the remote control.
Remove the battery and insert a new battery of the same type.
There is a risk of explosion if batteries are used improperly!
Please read the related safety information in Chapter 2.8.
Pay attention to the correct battery polarity!
Then replace the battery compartment again.
79
EN