5.6
Installing/Removing Elevating Legrests
Installing
1. Turn the Legrest to the side (open footplate is perpendicular to wheelchair).
2. Install the Pin at the top of the legrest into the hole in the hanger tube. Push downwards.
3. Rotate legrest toward the inside of the wheelchair until it locks in place.
NOTE:
The footplate will be on the inside of the wheelchair
when locked in place.
4. Repeat STEPS 1-3 for the opposite legrest.
Removing
1. To remove the legrest, pull the release lever
towards wheelchair frame, rotate legtrest out-
wards and lift upwards.
2. At this time, footplate height adjustment can be
made as in section 5.2 LEGREST HEIGHT
ADJUSTMENT.
Release
Lever
Pin
Hanger
Tube
39