Invacare Mirage User Manual page 76

4. Remove seat cushion. See section 8.1 INSTALLING/REMOVING SEAT CUSHION.
5. If the backrest has not been removed, seperate the hook and loop fastener strip on the rear,
underside, of the seat.
6. Disconnect the Battery harnesses and remove the batteries as described in section 10.1 IN-
STALLING/REMOVING BATTERIES.
7. Locate the Seat Clamps, at the front of the wheelchair, under the seat. See figure 1.
8. Pull the Seat Clamp levers downwards and disengage from the wheelchair frame.
NOTE:
Be sure that the Seat Clamp is released and clear of the wheelchair frame before attempting to
fold the chair
9. Stand to the side of the wheel chair, grasp the seat edges (front and rear) and pull upwards until
the wheel chair begins to fold.
10.Keep pulling upwards on the seat until the insides of the frame come together. The wheel chair
is now folded.
CAUTION:
Check the underside of the folded wheelchair and be sure that no cable harnesses are trapped in
the folding mechanism.
NOTE:
The armrests may also be removed at this point to reduce the overall weight or height of the
folded wheelchair. See section 6.1 INSTALLING / REMOVING ARMRESTS.
76