Invacare Mirage User Manual page 74

2. Disconnect the cable and slide through the wheelchair frame.
3. Remove the joystick mounting arm as described in section 12.3 JOYSTICK MOUNTING HARD
WARE
Installing all joystick mounting arm types.
1. Install the joystick mounting arm as described in section 12.3 JOYSTICK MOUNTING HARD
WARE
2. Locate the Joystick cable connector and feed cable through the wheelchair side frame and
towards the power module, located at the front of the chair, under the seat.
2. Connect the joystick cable plug into the corresponding socket in the power module.
NOTE:
The joystick cable connector is the only grey plug in the power module. The connector is also
polarised which makes it impossible to fit back in the wrong orientation.
74