Cisco Firepower 1010 Mount The Chassis page 9
Hide thumbs
Also See for Firepower 1010:
- Getting started manual (182 pages) ,
- Hardware installation manual (40 pages) ,
- Configuration note (21 pages)
Advertisement
Mount the Chassis
Figure 7: Tighten the Velcro Straps
1
Velcro straps tightened over power supply
Step 8
Slide the rack shelf into the sliding-rack tray.
Figure 8: Slide the Rack Shelf into the Sliding-Rack Tray
Step 9
The chassis is now installed in the rack shelf, which is installed in the sliding-rack tray. Repeat Steps 1 through 8 to
install a second chassis.
Rack-Mount the Chassis
—
Mount the Chassis
9
Advertisement
