Cisco Firepower 1010 Mount The Chassis page 7

Hide thumbs Also See for Firepower 1010:

Mount the Chassis

Figure 5: Install the Rack Shelf on the Chassis

Three short black screws M3 x 6 mm (part number

48-0384-01)

Step 4

Adjust the position of the chassis and the rack shelf until the three mounting holes in the dimples in the bottom of the

shelf are aligned with the mounting holes in the bottom of the chassis.

Step 5

Tighten the screws to lock the chassis into place on the rack shelf.

Caution

Make sure you are using the short black screws (M3 x 6 mm), otherwise you will damage the chassis.

Step 6

Carefully turn the rack shelf right-side up.

Step 7

Install the power supply in the rack shelf behind the chassis.

—

Mount the Chassis

Rack-Mount the Chassis